Icon QCon Pro X - DAW Controller

£637.00

Inc 20% VAT

Out of Stock

Usually available in 1-2 weeks


Shipping Information

FREE DELIVERY ON ALL ORDERS!

All orders can be shipped with free delivery. For orders over £50.00 this will be a next day courier service and for orders of less than £50.00 this will be First Class Royal Mail postage.

Other chargeable service options are available (see below).

Delivery Notifications

You will receive an email to the address you have supplied to us when your order has been dispatched.

Delivery Methods and Timescales

The delivery time scale is specified on the product page to indicate when you should expect to receive your order. If all item(s) are in stock and your order was placed before 2pm, subject to passing necessary checks, your order will be shipped the same day. Orders received just after 2pm are also often dispatched the same day, but this cannot be guaranteed.

See below for delivery options:

Royal Mail – First Class Recorded Delivery*

  • Price = FREE
  • Delivery Time – We cannot guarantee delivery time via Royal Mail. If this is a problem, please select a courier service

*Only available on orders with a value of less than £50

Courier – Next Working Day Service

  • Price = Free (Orders of £50+) / £9.95 (Orders of less than £50)
  • Delivery Time – Next working day from date of dispatch (see above)

Courier – Pre-noon, Next Working Day Service

  • Price = £9.95 (Orders of £50+) / £19.95 (Orders of less than £50)
  • Delivery Time – Next working day from date of dispatch (see above)

Courier – Saturday Delivery Service

  • Price = £19.95
  • Delivery Time – The first Saturday following date of dispatch (see above)

Due to the nature of the products we sell, we operate a strict fraud screening process and therefore we are only able to deliver to the billing address.

In the event of a delay, we will contact you either by email or telephone as soon as reasonably possible.

While 99% of UK locations are valid for next day/Saturday delivery, there are a few remote locations which are not covered.

Synthax Audio (UK) cannot deliver outside of the UK and Republic of Ireland*.

*RME products cannot be shipped to the Republic of Ireland.

Missed Deliveries

If you are not in to receive the order at the time delivery is attempted, a card will normally be left to notify you of the missed delivery attempt. This will allow you to either telephone the courier company to arrange a re-delivery at a more convenient time or collect it from your local courier depot or Royal Mail sorting office. For security reasons, all items require a signature.

If for any reason the item is returned to us (e.g. incorrect address specified, multiple failed delivery attempts), then we will inform you immediately by email as soon as we receive the item. From this point forth, you will be given a choice whether you wish us to re-dispatch the item or cancel the order. Please refer to our Cancellations & 14 Day Returns Procedure for more details. For items where delivery failed through no fault of Synthax Audio (UK), you will be liable for the original shipping charge, any courier surcharges and any subsequent delivery charges.

Late Deliveries or Dispatch

We are able to ship almost every order in the specified timescale. However, in very rare circumstances there can be an unforeseen delay. If this does happen, we will make it our priority to get your order dispatched from our warehouse as soon as reasonably possible.

There are also rare cases, beyond our control, when the delivery company itself has a problem which causes a delay in transit. In these situations we will do our utmost to liaise with the relevant delivery company to ensure delivery is completed as swiftly as possible.

Consequential Loss for Late Deliveries

If a delivery is late, then we will provide a refund of any delivery fee that we charged you. We do not provide financial compensation to cover consequential losses, e.g. for time taken off work to receive a delivery, or if the item is intended as a gift and you have to purchase the same item from a more expensive retailer.

Our full terms of sale can be viewed here.

Customer Rating: (0)

Icon QCon Pro X
USB DAW Controller

  • 9 x touch-sensitive motorized faders with 10-bit resolution
  • 8 x Dual function encoders with multi-color LED indication ring
  • Dual 2×56 large backlit LCDs to display channel name, control values etc. for each channel
  • 18 x assignable buttons
  • Jog shuttle wheel for scrubbing, fast search and control
  • Illuminated buttons for each channel including Record Enable, Solo, Mute, Select and Monitor
  • 6 x illuminated transport buttons including Play, Stop, Rec, Rewind, Fast Forward and Loop
  • Expandable to 32-channels using 3 QCon XS expander units (coming soon)
  • USB 2.0 high speed connectivity
  • Class-compliant with Windows XP, Vista (32-bit), Windows 7 (32-bit & 64-bit), Windows 8 (32-bit & 64-bit), Windows 10 (32-bit & 64-bit) and Mac OS X

Description

Get out of the box and into your mix

Expand and command your Digital Audio Workstation (DAW) by adding true tactile control via USB 2.0. The all new Icon QCon Pro X is a control surface designed to get you out of “the box" of your computer and into your music. Record and mix without always having to point and click.

The Icon QCon Pro X puts the functions of your DAW at your fingertips by providing you with nine (9) full sized motorized faders, eight (8) rotary dual-function encoders, two (2) large backlit LCD screens, LED volume metering, a jog wheel and plenty of buttons to press. Adjust multiple volume or pan levels simultaneously. Mute or solo numerous tracks on the fly.

Use the transport section to conveniently play, stop, fast forward, rewind, record, loop, zoom, punch in and punch out of your compositions. Spin the nicely sized jog wheel to scrub through tracks and address areas of special interest. Dedicated buttons also allow you to access your entire mix by banking across tracks in groups of 8 or 1 track at a time.

Control any DAW

The Icon QCon Pro X is a powerful control surface for any DAW. Integration is most easily facilitated using any one of our DAW specific custom modules. Simply select the module for your DAW, follow the easy install procedure, and the QCon Pro X will use Mackie Control or HUI protocol to provide seamless interfacing with your DAW's functions. Support is included as standard for the most popular DAWs including Cubase, Nuendo, Ableton Live, ProTools, Logic, Reason, Studio One, Bitwig, Samplitude and Reaper.

Once the Icon QCon Pro X is linked to your DAW it will always boot up in the proper configuration, even after being powered off. If you have a module installed for one DAW, and want to use a different DAW, then no worries. You can still go into manual mode and select any of the other supported DAWs from a list displayed on the QCon Pro X LCD upon boot-up. Even if your DAW is not supported by a custom module, you can still map its functions to the Icon QCon Pro X using the intuitive MIDI learn mode.

Icon QCon Pro X Review By Ask Audio

Control your plugins and automation too

The QCon Pro X also gives you tactile control of your VST, RTAS, Direct X and AU Plugins. Dial in EQ frequencies, Q or gain with the rotary encoders. The values of different parameters are shown on the upper LCD screen. Control Virtual Instruments as well. There's also a “FLIP" button for fader control of plug-in parameters.

Automation of track and plugin parameters is also made easy with the Icon QCon Pro X. Write fader rides just like you would on any large format analogue console using buttons for familiar functions like GROUP, WRITE, TOUCH, LATCH and TRIM.

The Icon QCon Pro X is also scalable. Expand in groups of 8 up to 32 channels and create a custom surface to fit your needs. With the Icon QCon Pro X you get the best of both worlds; the total recall, power and flexibility of your DAW with the look, feel and functionality of a sturdy piece of hardware.

Features

  • 8+1 touch-sensitive motorized faders with 10-bit resolution
  • 12 segment LED meter bridge
  • Stereo LED master channel level metering on metering bridge
  • 8 Dual function encoders with multi-color LED indication ring
  • 11-segment multi-color LED surrounding the encoders to indicate the rotation position
  • Dual 2×56 large backlit LCDs to display channel name, control values etc. for each channel
  • 12-segment LED display showing time location of your project in either SMPTE or BBT format
  • 18 assignable buttons
  • Jog shuttle wheel for scrubbing, fast search and control
  • Illuminated buttons for each channel including Record Enable, Solo, Mute, Select and Monitor
  • 6 illuminated transport buttons including Play, Stop, Rec, Rewind, Fast Forward and Loop
  • Illuminated ZOOM button with 4 direction buttons
  • 9 illuminated assignable MIDI function buttons
  • Expandable to 32-channels using 3 QCon XS expander units (coming soon)
  • Optional expander units with motorized joysticks for surround sound mixing, extra button units and extra knob units (also coming soon)
  • Two (2) 1/4" connectors for foot switches and pedals
  • Automatic and manual mode switch for accessing different DAW modes
  • Class-compliant with Windows XP, Vista (32-bit), Windows 7 (32-bit & 64-bit), Windows 8 (32-bit & 64-bit), Windows 10 (32-bit & 64-bit) and Mac OS X
  • USB 2.0 high speed connectivity
  • ICON “Quick-Setup" driver is available for Cubase, Nuendo, Reason and Bitwig for instant plug & play compatibility
  • Optional automatic DAW detection mode is available for Cubase, Nuendo, Ableton Live, ProTools, Logic, Reason, Studio One, Bitwig, Samplitude and Reaper via custom module
  • Built-in Mackie Control for all DAWs listed (except for ProTools which uses Mackie HUI Protocol

  • PVC overlays are included for all DAWs listed (except Cubase and Nuendo which is the stock module)
  • Bundled with ICON edition Cubase LE and Samplitude LE
  • User self-defined (MIDI Learn) mode for other DAWs not supported with presets
  • Easy firmware upgrade available via USB connection and iMap software
  • Superior build quality and robust metal casing with Kensington lock port

Specifications

Technical Specifications

Connector to computer: USB connector (standard type)

Connector to extender : USB connector (B-Type)

Power supply : 12V, 2.5A DC

Current consumption : 2A or less

Weight : 6kg (13.2lb)

Dimensions : 473(L) x 416(W) x 188(H)mm

Dimensions : 18.62"(L) x 16.38"(W) x 7.4"(H)

Operating System Compatibility

Operating System Compatible (Yes/No)
iOS 7 - 9 No
Mac OS 10.8(Intel CPU/32-bit)
Yes
Mac OS 10.8(Intel CPU/64-bit)
Yes
Mac OS X 10.9 Yes
Mac OS X 10.10
Yes
Mac OS X 10.11
Yes
Windows XP (32-bit) Yes
Windows XP (64-bit)
Yes
Vista (32-bit)
Yes
Vista (64-bit) Yes
Windows 7 (32-bit)
Yes
Windows 7 (64-bit)
Yes
Windows 8 (32-bit)
Yes
Windows 8 (64-bit)
Yes
Windows 8.1 (32-bit)
Yes
Windows 8.1 (64-bit)
Yes
Windows 10 (32-bit)
Yes
Windows 10 (64-bit)
Yes


Product Reviews

Customer Reviews

This item currently has no reviews.

Purchased this product?

Please login to review this product