- Decentralized Network Design
- High quality, low latency Audio Over IP
- 100MB/s Fast Ethernet with CAT5 cabling
- Two mic/line inputs & stereo mix output
- myMix CONTROL web browser interface
- Intuitive, patented user interface
- Desk- or Wall-Mount
- Connections on Euro Block
- Fully compatible with all myMix devices
Installed Audio Network Mixing
myMix is a decentralized network-based audio mixing system. Designed for intuitive operation combined with highest demands in pro audio, it uses a 24-bit / 48kHz, low latency IP protocol that includes name based auto discovery of all devices and audio channels. The portable version of myMix was introduced 2010 and has gained globally thousands of very satisfied customers. The myMix Install with its stylish glass front panel now accommodates for all kinds of commercial AV installations.
The patented user interface of myMix is very intuitive and designed to be operated also by non-audio engineers. Looking at meaningful names rather than generic labels, with a simple one-large button control makes it is easy for people to adjust the audio levels themselves without having to rely on external help, which translates into time and cost saving.
Each myMix has local memory to store settings and a central remote control, for configuring, editing, and individual parameter locking for the supporting technicians is available through the myMix CONTROL web browser application.
Audio applications that can be enhanced with myMix are endless. For example: transfer a high quality audio signal over IP from one point of the building to the other (or even another building); combine local audio sources like a microphone or PC output with background program, create a small audio system for a room combining applications... the list goes on and on.
Each myMix is a self-contained audio mixer that can also operate on its own. The local inputs of any myMix or IEX16 are available for all myMix devices on the network, as well as the stereo mixes of each myMix. Each myMix can select in one of the 20 profiles up to 16 audio channels from the network - ideal for switching between individual configurations. For anything more complex, myMix CONTROL allows individual editing, configuration and locking - even from remote locations.
myMix Install - Get high-quality audio in your building wherever you need it. The myMix Install version is the solution where style and functionality in a surface mount housing are required.
The patented user interface of myMix is very intuitive and designed to be operated by both technical engineers as well as non-audio engineers. Adjusting audio levels is easy for anyone to do because of the personally named channels and simple control layout. Each myMix has local memory to store settings, a central remote control, for configuring, editing, and individual parameter locking for the supporting technicians is available through myMix CONTROL web browser application.
- Same functionality as the portable myMix
- Two local audio network inputs (mic/line)
- Stereo line level out for the mix signal
- Elegant front panel for flush mount installation
- Audio connections on Phoenix connector (included)
- Optional wall mount box
Input Impedance: 2 kOhms / 20 kOhms (microphone / line)
Input Gain: Microphone: variable from +4 to +60 dB
Line: variable from -16 to +40 dB
Input Level: +14 dBu / +34 dBu (microphone / line) maximum
Frequency Response: 20 Hz to 20 kHz (+0 dB, -1 dB)
Output Impedance: Line / Headphone Outputs: 75 ohms balanced / to drive >16 ohms
Output Level: Line: +21 dBu maximum
Signal to Noise Ratio: >104 dB
THD + N: Microphone Input to Line Out: <0.022%
Crosstalk: <-80 dB (L to R)
Mute: >100 dB
Network Type: Fast Ethernet 100 Mb/s
Network Cable Type: CAT5
Latency: <2 ms (network)
Conversion: 24-bit (AD/DA)
Recording Media: SD or SDHC card
Recording Format: WAV file, 24-bit, 48 kHz sampling rate
Connectors: 1 x Balanced Euro Block screw, microphone input
1 x Balanced Euro Block screw, line input
1 x Balanced Euro Block screw, line output
1 x 3.5 mm stereo headphone jack, output
LAN Port: RJ-45
Dimensions (W x H x D): 6.6 x 8.5 x 2.2" (166.5 x 216.0 x 56.0 mm)
Weight: 2.4 lb (1.1 kg)
Package Weight: 5.0 lb
Box Dimensions: (LxWxH) 14.0 x 12.0 x 8.0"
This item currently has no reviews.