Dynaudio M3XE
3-way Quad-Amped
Active Main Monitor
- 3-Way Main Monitors for professional recording studios
- Designed for Mastering, Tracking and Mixing
- Bi-amped / passive crossover between mid and high.
- Powered by dual Lab.gruppen PLM 12k44 amplifiers
For more information please contact us.
Description
For Mastering, Tracking and Mixing. Quad – amped.
The Dynaudio Professional M3XE monitor system that takes monitoring to a whole new level with a significant upgrade from its predecessor - the renowned M3A 3-way monitor. Each speaker is powered by a four channel PLM 12k44 amplifier from Lab.gruppen.
With the newest and most pristine Dynaudio ESOTAR² driver technology, M3XE takes over where most other monitor systems give up. With unsurpassed attention to detail, underpinned by an impressive 22Hz - 21kHz frequency response and beyond 135dB SPL, M3XE leaves no room for desire in terms of resolution, range or sheer power.
Different from its sister monitor M3VE, a set of M3XE's is powered by not one, but two 12k44 Lab.gruppen amplifiers, using the integrated Lake active cross-over processing as well as powering the HF, MF and dual LF woofers by the four independent amplifier channels of the 12k44.
Features
-
Three-Way Main Monitor
-
Handcrafted drivers
-
For in-wall or free standing setups
-
Matched with Lab.gruppen PLM 12k44 amplifier
-
Made in Denmark
Specification
Dynaudio M3XE Specs
| System: | 3-way Active Main Monitor |
|---|---|
| Frequency Response (±3dB): | 22Hz - 21kHz |
| Peak SPL 1m, pair (IEC Short Term): | > 135dB peak |
| Resonance Frequency: | 24Hz |
| Internal Cabinet Volume: | 145 liters |
| Bass Principle: | Bass reflex |
| Amplifier: | 1 Lab-gruppen PLM10000Q (pr. speaker). Preset: M3XE V06 |
| Tweeter: | Esotar² 28mm soft dome Magnetic fluid, Metal rear chamber, Pure alu wire voice coil, 4 mm die-cast alu front, Neodym magnet material |
| Midranges: | 15cm with 75mm diameter pure alu wire voice coil, MSP-cone, long stroke |
| Woofers: | Esotar 30cm with 75 mm diameter pure cupper wire voice-coil, MSP-cone, long stroke |
| Weight: | 65kg |
| Dimensions (W x H x L): | 555 x 775 x 505mm |
| Cabinet: | 25mm MDF. Strategically braced and damped. Low turbulence reflex-ports. Separate chambers for each woofer. |
| Crossover: | All 4 channels: Active dsp-based in-amp Lake processor. Each channel has impedance-correction providing the best working conditions for the ampflifier. |
Lab.gruppen PLM 12k44 amplifier specs
| Model: | 12k44 |
|---|---|
| Number of amplifier channels: | 4 |
| Max out Power per Channel (4 ohms, all channels driven): | 3000W |
| THD + N at 1 kHz and 1 dB below clipping: | < 0.04 % |
| Dynamic Range: | > 114dB |
| Channel separation (Crosstalk) at 1 kHz: | > 70dB |
| Inputs: | Analog, AES/EBU & Dante |
| Analog Input Sample Rate / Resolution: | 96kHz / 24bit |
| Weight: | 16.5kg (36lbs) |
| Dimensions (WxHxD): | 483 (19") x 88 (2 U) x 424mm (16") |
Customer Reviews
This item currently has no reviews.
