RME ADI-192 DD

£1,339.00

Inc 20% VAT

Out of Stock

Usually available in 2-3 days


Shipping Information

FREE DELIVERY ON ALL ORDERS!

All orders can be shipped with free delivery. For orders over £50.00 this will be a next day courier service and for orders of less than £50.00 this will be First Class Royal Mail postage.

Other chargeable service options are available (see below).

Delivery Notifications

You will receive an email to the address you have supplied to us when your order has been dispatched.

Delivery Methods and Timescales

The delivery time scale is specified on the product page to indicate when you should expect to receive your order. If all item(s) are in stock and your order was placed before 2pm, subject to passing necessary checks, your order will be shipped the same day. Orders received just after 2pm are also often dispatched the same day, but this cannot be guaranteed.

See below for delivery options:

Royal Mail – First Class Recorded Delivery*

  • Price = FREE
  • Delivery Time – We cannot guarantee delivery time via Royal Mail. Whilst items shipped using Royal Mail First Class usually take 1 - 2 days, please note this is NOT a guaranteed next day delivery service. If this is a problem, please select one of our courier service options.

*Only available on orders with a value of less than £50

Courier – Next Working Day Service

  • Price = Free (Orders of £50+) / £9.95 (Orders of less than £50)
  • Delivery Time – Next working day from date of dispatch (see above)

Courier – Pre-noon, Next Working Day Service

  • Price = £9.95 (Orders of £50+) / £19.95 (Orders of less than £50)
  • Delivery Time – Next working day from date of dispatch (see above)

Courier – Saturday Delivery Service

  • Price = £19.95
  • Delivery Time – The first Saturday following date of dispatch (see above)

Due to the nature of the products we sell, we operate a strict fraud screening process and therefore we are only able to deliver to the billing address.

In the event of a delay, we will contact you either by email or telephone as soon as reasonably possible.

While 99% of UK locations are valid for next day/Saturday delivery, there are a few remote locations which are not covered.

Synthax Audio (UK) cannot deliver outside of the UK and Republic of Ireland*.

*RME products cannot be shipped to the Republic of Ireland.

Missed Deliveries

If you are not in to receive the order at the time delivery is attempted, a card will normally be left to notify you of the missed delivery attempt. This will allow you to either telephone the courier company to arrange a re-delivery at a more convenient time or collect it from your local courier depot or Royal Mail sorting office. For security reasons, all items require a signature.

If for any reason the item is returned to us (e.g. incorrect address specified, multiple failed delivery attempts), then we will inform you immediately by email as soon as we receive the item. From this point forth, you will be given a choice whether you wish us to re-dispatch the item or cancel the order. Please refer to our Cancellations & 14 Day Returns Procedure for more details. For items where delivery failed through no fault of Synthax Audio (UK), you will be liable for the original shipping charge, any courier surcharges and any subsequent delivery charges.

Late Deliveries or Dispatch

We are able to ship almost every order in the specified timescale. However, in very rare circumstances there can be an unforeseen delay. If this does happen, we will make it our priority to get your order dispatched from our warehouse as soon as reasonably possible.

There are also rare cases, beyond our control, when the delivery company itself has a problem which causes a delay in transit. In these situations we will do our utmost to liaise with the relevant delivery company to ensure delivery is completed as swiftly as possible.

Consequential Loss for Late Deliveries

If a delivery is late, then we will provide a refund of any delivery fee that we charged you. We do not provide financial compensation to cover consequential losses, e.g. for time taken off work to receive a delivery, or if the item is intended as a gift and you have to purchase the same item from a more expensive retailer.

Our full terms of sale can be viewed here.

Customer Rating: (0)

192 kHz 8-Channel AES-EBU/ADAT/TDIF
Format/Samplerate-Converter

  • 4 x AES/EBU I/O (XLR)
  • 2 x ADAT I/O (optical)
  • 2 x TDIF I/O (D-sub)
  • 1 x SPDIF I/O (optical)
  • 1 x Word Clock I/O




Description

Overview

The ADI-192 DD is the successor to the highly successful ADI-8 DD. The completely re-engineered device was designed to be the most powerful format and sample rate converter ever. Hence the ADI-192 DD not only features considerable improvements compared to the ADI-8 DD, but also adds a number of new and unique features:

  • Supports 192 kHz with ADAT, TDIF und AES
  • 8-Channel sample rate conversion up to 192 kHz
  • Sample Rate Conversion can be selected for AES, TDIF or ADAT
  • 8-Channel Sample Rate Conversion without phase errors (sub-sample synchronous)
  • SteadyClock for maximum jitter suppression and clock regeneration
  • Complete triple format converter AES/TDIF/ADAT with added SPDIF TOSLINK I/O
  • Direct support for Double and Quad Wire, S/MUX and S/MUX4
  • Also when using SRC
  • Special TDIF word clock output
  • Simplified and easy-to-use user interface


ADI-192 DD 192 kHz 8-Channel AES/EBU.ADAT.TDIF Format/Samplerate-Converter
RME ADI-192 DD Front Panel - Click To Enlarge


Features

The unit consists of three 8-Channel format converters with 24-bit audio resolution. The three output formats ADAT, TDIF and AES independently access the three input formats ADAT, TDIF and AES schematic view. Thanks to free selection of inputs, signals can be copied and distributed between all connected devices - without the need to change any cables. Due to the unlimited input selection, the unit not only transfers data to the same output format.

For example, the ADI-192 DD can operate as a quad AES/EBU sample rate converter. Four XLR AES/EBU inputs and outputs each, and two ADAT and TDIF inputs and outputs allow full 8-Channel operation even at 96 kHz / 24-bit. At 192 kHz, there are eight AES channels and four ADAT and TDIF channels. Switchable 24/192kHz sample rate converters allow 8-Channel sample rate conversion and clock decoupling of the highest quality.

Applications include:

  • AES/EBU frontend for RME's digital I/O-cards (with ADAT optical I/O)
  • TDIF frontend for RME's digital I/O-cards (with ADAT optical I/O)
  • AES and ADAT frontend for DTRS machines
  • 8-Channel AES, TDIF and ADAT input and output for digital mixers with ADAT/TDIF port
  • Operation of four SPDIF or AES devices with different sample rates in any digital audio network
  • Converts Double and Quad Wire to Single Wire and vice versa, even with simultaneous sample rate conversion

ADI-192 DD 192 kHz 8-Channel AES/EBU.ADAT.TDIF Format/Samplerate-Converter
RME ADI-192 DD Rear Panel - Click To Enlarge

48 LEDs clearly display the current status of the incoming and outgoing signals and the processing performed within the unit. The SyncCheck technology known from other RME devices indicates whether the input signal is locked and whether all inputs are sychronized. The AES output signal can be given a consumer or professional status. The first AES output (channels 1/2) is also available as optical TOSLINK.

Professionals will love the fact that the ADI-192 DD supports Double Wire, Quad Wire, S/MUX and S/MUX4, making it compatible to all methods of increasing sample rates by sample multiplexing on all platforms. The unit can also convert between these formats, even along with SRC. If more than 8 channels are required, several units can be cascaded and synchronized sample-accurately by word clock.

The ADI-192 DD also features an automatic distribution mode. If only one of the four AES inputs is used, the device will copy these two channels to the other three AES outputs.

RMEs SteadyClock(TM) guarantees excellent clock quality in every situation. Due to the highly efficient jitter reduction, any clock signal can be improved and refreshed, and subsequently be used as reference clock at the word clock output. Intelligent Clock Control (ICC) will retain the last valid sample frequency in case of a loss of the input signal. All settings are retained when the device is switched off.

The ADI-192 DD is the all-in-one solution for every application of format and sample rate conversion, from 2 to 8 channels. Its flexibility is unsurpassed and the price/performance ratio is simply sensational.

Specifications

  • Input AES/EBU: 4 x XLR, transformer balanced, highly sensitive input stage (< 0.3 Vpp), SPDIF compatible, max. 192 kHz Single Wire
  • Output AES/EBU: 4 x XLR, transformer balanced, 4.5 Vpp, max. 192 kHz Single Wire
  • Input ADAT optical: 2 x TOSLINK, 24-bit, Bitclock PLL
  • Output ADAT optical: 2 x TOSLINK, 24-bit
  • Input/Output TDIF: 2 x D-sub 25 pin, 24-bit
  • Input/Output SPDIF front: 2 x TOSLINK, 24-bit, max. 192 kHz
  • Input Word Clock: Signal Adaptation Circuit (functional from 1.2 Vpp)
  • Output Word Clock: BNC, low impedance driver stage, 4 Vpp into 75 Ohms, short-circuit-proof
  • Sync sources: Internal, ADAT optical in, AES/EBU in, TDIF in, word clock in
  • Varipitch: by input signal or word clock
  • Sample frequencies: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, variable (sync/word clock)
  • Sample rate range: AES, word clock: 28 kHz-204 kHz, ADAT/TDIF 30 kHz - 54 kHz
  • Jitter: Internal clock < 1 ns, external clocks < 1 ns
  • Jitter sensitivity: all PLLs operate error-free even at 100 ns
  • Jitter suppression: >30 dB (2.4 kHz)
  • SRC dynamic ratio: 140 dB RMS unweighted, 143 dBA
  • SRC THD+N: < -140 dB
  • Sample rate ratio: max. 7:1 / 1:7
  • Power supply: Internal switching mode PS, 100V - 240V AC, 20 Watt
  • Dimensions: (WxHxD) 483 x 44 x 200 mm

Product Reviews

Customer Reviews

This item currently has no reviews.

Purchased this product?

Please login to review this product