Pre Order: RME Digiface Dante

£1,159.00

Inc 20% VAT

Out of Stock

Available for pre-order

Due mid-November 2018


Shipping Information

FREE DELIVERY ON ALL ORDERS!

All orders can be shipped with free delivery. For orders over £50.00 this will be a next day courier service and for orders of less than £50.00 this will be First Class Royal Mail postage.

Other chargeable service options are available (see below).

Delivery Notifications

You will receive an email to the address you have supplied to us when your order has been dispatched.

Delivery Methods and Timescales

The delivery time scale is specified on the product page to indicate when you should expect to receive your order. If all item(s) are in stock and your order was placed before 2pm, subject to passing necessary checks, your order will be shipped the same day. Orders received just after 2pm are also often dispatched the same day, but this cannot be guaranteed.

See below for delivery options:

Royal Mail – First Class Recorded Delivery*

  • Price = FREE
  • Delivery Time – We cannot guarantee delivery time via Royal Mail. If this is a problem, please select a courier service

*Only available on orders with a value of less than £50

Courier – Next Working Day Service

  • Price = Free (Orders of £50+) / £9.95 (Orders of less than £50)
  • Delivery Time – Next working day from date of dispatch (see above)

Courier – Pre-noon, Next Working Day Service

  • Price = £9.95 (Orders of £50+) / £19.95 (Orders of less than £50)
  • Delivery Time – Next working day from date of dispatch (see above)

Courier – Saturday Delivery Service

  • Price = £19.95
  • Delivery Time – The first Saturday following date of dispatch (see above)

Due to the nature of the products we sell, we operate a strict fraud screening process and therefore we are only able to deliver to the billing address.

In the event of a delay, we will contact you either by email or telephone as soon as reasonably possible.

While 99% of UK locations are valid for next day/Saturday delivery, there are a few remote locations which are not covered.

Synthax Audio (UK) cannot deliver outside of the UK and Republic of Ireland*.

*RME products cannot be shipped to the Republic of Ireland.

Missed Deliveries

If you are not in to receive the order at the time delivery is attempted, a card will normally be left to notify you of the missed delivery attempt. This will allow you to either telephone the courier company to arrange a re-delivery at a more convenient time or collect it from your local courier depot or Royal Mail sorting office. For security reasons, all items require a signature.

If for any reason the item is returned to us (e.g. incorrect address specified, multiple failed delivery attempts), then we will inform you immediately by email as soon as we receive the item. From this point forth, you will be given a choice whether you wish us to re-dispatch the item or cancel the order. Please refer to our Cancellations & 14 Day Returns Procedure for more details. For items where delivery failed through no fault of Synthax Audio (UK), you will be liable for the original shipping charge, any courier surcharges and any subsequent delivery charges.

Late Deliveries or Dispatch

We are able to ship almost every order in the specified timescale. However, in very rare circumstances there can be an unforeseen delay. If this does happen, we will make it our priority to get your order dispatched from our warehouse as soon as reasonably possible.

There are also rare cases, beyond our control, when the delivery company itself has a problem which causes a delay in transit. In these situations we will do our utmost to liaise with the relevant delivery company to ensure delivery is completed as swiftly as possible.

Consequential Loss for Late Deliveries

If a delivery is late, then we will provide a refund of any delivery fee that we charged you. We do not provide financial compensation to cover consequential losses, e.g. for time taken off work to receive a delivery, or if the item is intended as a gift and you have to purchase the same item from a more expensive retailer.

Our full terms of sale can be viewed here.

Customer Rating: (0)

RME Digiface Dante
Bus-Powered Dante and MADI
Audio Interface

The RME Digiface Dante is currently available to pre-order, with shipping expected mid-November 2018.

  • 258 Channels: 128 in / 128 out
  • 64 Channels Dante / 64 Channels MADI
  • 2 x Gigabit Ethernet (802.3 compliant)
  • 1 x MADI I/O coaxial I/0
  • Headphone Output
  • Wordclock I/0
  • USB 3.0
  • Bus-powered
  • TotalMix FX

Description

RME Digiface Dante

The new bus powered RME Digiface Dante enables the transmission of up to 64 Dante channels and 64 MADI channels via a single USB 3.0 connection.

The Dante Audio-over-IP protocol was developed by the Australian company Audinate and enables uncompressed transmission of digital audio signals with low latency over long distances. The RME Digiface Dante USB 3.0/Dante interface offers a compact and lightweight solution for mobile Dante users.

Dante & MADI
With the integration of RME's renowned Mac and Windows MADI drivers, the Digiface Dante allows users to seamlessly run up to 64 MADI I/O channels via USB 3.0 in addition to the 64 Dante channels. For this purpose the BNC connectors, normally used for word clock, would be switched to MADI I/O.

The full complement of 128 channels are fully controllable using the included Dante control software and the DSP-based RME TotalMix FX mixer with its comprehensive routing and monitoring options.

The Digiface Dante has two multifunctional banks of redundant network ports that can be used as inputs and outputs, as network switches and for redundant operation with primary and secondary networks in case of increased security requirements. The Digiface Dante can also be used as a mobile standalone 64-channel Dante/MADI converter.

In addition to the USB 3.0 port, Dante network ports, word clock I/O ports and power supply connector, the Digiface Dante has a high-quality headphone monitor output that can be used as a line output to transmit an optional analogue stereo mix.

TotalMix FX

Like all of the latest RME interfaces, the Digiface Dante also includes the powerful digital real-time mixer and software controller TotalMix FX.

With near-unlimited mixing and routing options, TotalMix FX allows for any combination of inputs (and software playback channels) to be routed simultaneously to any hardware outputs. A dedicated Control Room section is also included, with features such as Talkback, Main/Phones, Fader Groups, Mute Groups and much more, all of which is completely remote controllable via the Mackie or OSC protocols.

Please note that the Digiface Dante does not feature a dedicated FX DSP, therefore the FX found on other RME interfaces are not available on this device.

Here are some typical applications for TotalMix:

  • Setting up delay-free submixes. The Digiface Dante allows for up to 65 fully independent stereo submixes.

  • Unlimited routing of inputs and outputs (free utilisation, patchbay functionality).

  • Distributing signals to several outputs at a time. TotalMix offers state-of-the-art splitter and distributor functions.

  • Simultaneous playback of different programs via a single stereo output. The ASIO multiclient driver supports the usage of several programs at the same time. When done on different playback channels TotalMix provides the means to mix and monitor these on a single stereo output.

  • Mixing of the input signal to the playback signal (complete ASIO Direct Monitoring). RME not only is the pioneer of ADM, but also offers the most complete implementation of the ADM functions.

  • Integration of external devices. Use TotalMix to insert external effects devices, be it in the playback or in the record path. Depending on the current application, the functionality equals insert or effects send and effects return, for example as used during real-time monitoring when adding some reverb to the vocals.


Every single input channel, playback channel and hardware output features a Peak and RMS level meter, calculated in hardware. These level displays are very useful to determine the presence and routing destinations of the audio signals.

Customer Reviews

This item currently has no reviews.

Purchased this product?

Please login to review this product